Pipeline

A pipeline describes a workflow operation in Zuul. It associates jobs for a given project with triggering and reporting events.

Its flexible configuration allows for characterizing any number of workflows, and by specifying each as a named configuration, makes it easy to apply similar workflow operations to projects or groups of projects.

By way of example, one of the primary uses of Zuul is to perform project gating. To do so, one can create a gate pipeline which tells Zuul that when a certain event (such as approval by a code reviewer) occurs, the corresponding change or pull request should be enqueued into the pipeline. When that happens, the jobs which have been configured to run for that project in the gate pipeline are run, and when they complete, the pipeline reports the results to the user.

Pipeline configuration items may only appear in config-projects.

Generally, a Zuul administrator would define a small number of pipelines which represent the workflow processes used in their environment. Each project can then be added to the available pipelines as appropriate.

Here is an example check pipeline, which runs whenever a new patchset is created in Gerrit. If the associated jobs all report success, the pipeline reports back to Gerrit with Verified vote of +1, or if at least one of them fails, a -1:

- pipeline:
    name: check
    manager: independent
    trigger:
      my_gerrit:
        - event: patchset-created
    success:
      my_gerrit:
        Verified: 1
    failure:
      my_gerrit:
        Verified: -1
pipeline

The attributes available on a pipeline are as follows (all are optional unless otherwise specified):

pipeline.name (required)

This is used later in the project definition to indicate what jobs should be run for events in the pipeline.

pipeline.manager (required)

There are several schemes for managing pipelines. The following table summarizes their features; each is described in detail below.

Manager

Use Case

Dependencies

Merge

Shared Queues

Window

Independent

check, post

No

No

No

Unlimited

Dependent

gate

Yes

Yes

Yes

Variable

Serial

deploy

No

No

Yes

1

Supercedent

post, promote

No

No

Project-ref

1

independent

Every event in this pipeline should be treated as independent of other events in the pipeline. This is appropriate when the order of events in the pipeline doesn’t matter because the results of the actions this pipeline performs can not affect other events in the pipeline. For example, when a change is first uploaded for review, you may want to run tests on that change to provide early feedback to reviewers. At the end of the tests, the change is not going to be merged, so it is safe to run these tests in parallel without regard to any other changes in the pipeline. They are independent.

Another type of pipeline that is independent is a post-merge pipeline. In that case, the changes have already merged, so the results can not affect any other events in the pipeline.

dependent

The dependent pipeline manager is designed for gating. It ensures that every change is tested exactly as it is going to be merged into the repository. An ideal gating system would test one change at a time, applied to the tip of the repository, and only if that change passed tests would it be merged. Then the next change in line would be tested the same way. In order to achieve parallel testing of changes, the dependent pipeline manager performs speculative execution on changes. It orders changes based on their entry into the pipeline. It begins testing all changes in parallel, assuming that each change ahead in the pipeline will pass its tests. If they all succeed, all the changes can be tested and merged in parallel. If a change near the front of the pipeline fails its tests, each change behind it ignores whatever tests have been completed and are tested again without the change in front. This way gate tests may run in parallel but still be tested correctly, exactly as they will appear in the repository when merged.

For more detail on the theory and operation of Zuul’s dependent pipeline manager, see: Project Gating.

serial

This pipeline manager supports shared queues (like depedent pipelines) but only one item in each shared queue is processed at a time.

This may be useful for post-merge pipelines which perform partial production deployments (i.e., there are jobs with file matchers which only deploy to affected parts of the system). In such a case it is important for every change to be processed, but they must still be processed one at a time in order to ensure that the production system is not inadvertently regressed. Support for shared queues ensures that if multiple projects are involved deployment runs still execute sequentially.

supercedent

This is like an independent pipeline, in that every item is distinct, except that items are grouped by project and ref, and only one item for each project-ref is processed at a time. If more than one additional item is enqueued for the project-ref, previously enqueued items which have not started processing are removed.

In other words, this pipeline manager will only run jobs for the most recent item enqueued for a given project-ref.

This may be useful for post-merge pipelines which perform artifact builds where only the latest version is of use. In these cases, build resources can be conserved by avoiding building intermediate versions.

Note

Since this pipeline manager filters intermediate buildsets using it in combination with file filters on jobs is dangerous. In this case jobs of in between buildsets can be unexpectedly skipped entirely. If file filters are needed the independent or serial pipeline managers should be used.

Note

Since this pipeline manager creates a virtual queue for each project-ref, it ignores manually configured shared queues as well as circular dependencies.

pipeline.post-review
Default: false

This is a boolean which indicates that this pipeline executes code that has been reviewed. Some jobs perform actions which should not be permitted with unreviewed code. When this value is false those jobs will not be permitted to run in the pipeline. If a pipeline is designed only to be used after changes are reviewed or merged, set this value to true to permit such jobs.

For more information, see Secret and job.post-review.

pipeline.description

This field may be used to provide a textual description of the pipeline. It may appear in the status page or in documentation.

pipeline.variant-description
Default: branch name

This field may be used to provide a textual description of the variant. It may appear in the status page or in documentation.

pipeline.success-message
Default: Build successful.

The introductory text in reports when all the voting jobs are successful.

pipeline.failure-message
Default: Build failed.

The introductory text in reports when at least one voting job fails.

pipeline.start-message
Default: Starting {pipeline.name} jobs.

The introductory text in reports when jobs are started. The following replacement fields are available:

pipeline

The name of the pipeline

item_url

The full URL to information about the item in the web UI

change

Deprecated: information about the change

changes

Deprecated: information about the change

status_url

Deprecated: the configured web ui status page root

Warning

The replacement fields change, changes, and status_url are deprecated. Use item_url, which is automatically the best URL for information about the item instead.

pipeline.enqueue-message

The introductory text in reports when an item is enqueued. Empty by default. The following replacement fields are available:

pipeline

The name of the pipeline

item_url

The full URL to information about the item in the web UI

change

Deprecated: information about the change

changes

Deprecated: information about the change

status_url

Deprecated: the configured web ui status page root

Warning

The replacement fields change, changes, and status_url are deprecated. Use item_url, which is automatically the best URL for information about the item instead.

pipeline.merge-conflict-message
Default: Merge failed.

The introductory text in the message reported when a change fails to merge with the current state of the repository. Defaults to “Merge failed.”

pipeline.no-jobs-message

The introductory text in reports when an item is dequeued without running any jobs. Empty by default. The following replacement fields are available:

pipeline

The name of the pipeline

item_url

The full URL to information about the item in the web UI

change

Deprecated: information about the change

changes

Deprecated: information about the change

status_url

Deprecated: the configured web ui status page root

Warning

The replacement fields change, changes, and status_url are deprecated. Use item_url, which is automatically the best URL for information about the item instead.

pipeline.dequeue-message
Default: Build canceled.

The introductory text in reports when an item is dequeued. The dequeue message only applies if the item was dequeued without a result.

pipeline.footer-message

Supplies additional information after test results. Useful for adding information about the CI system such as debugging and contact details.

pipeline.trigger

At least one trigger source must be supplied for each pipeline. Triggers are not exclusive – matching events may be placed in multiple pipelines, and they will behave independently in each of the pipelines they match.

Triggers are loaded from their connection name. The driver type of the connection will dictate which options are available. See Drivers.

pipeline.require

If this section is present, it establishes prerequisites for any kind of item entering the Pipeline. Regardless of how the item is to be enqueued (via any trigger or automatic dependency resolution), the conditions specified here must be met or the item will not be enqueued. These requirements may vary depending on the source of the item being enqueued.

Requirements are loaded from their connection name. The driver type of the connection will dictate which options are available. See Drivers.

pipeline.reject

If this section is present, it establishes prerequisites that can block an item from being enqueued. It can be considered a negative version of pipeline.require.

Requirements are loaded from their connection name. The driver type of the connection will dictate which options are available. See Drivers.

pipeline.allow-other-connections
Default: true

If this is set to false then any change enqueued into the pipeline (whether it is enqueued to run jobs or merely as a dependency) must be from one of the connections specified in the pipeline configuration (this includes any trigger, reporter, or source requirement). When used in conjuctions with pipeline.require, this can ensure that pipeline requirements are exhaustive.

pipeline.supercedes

The name of a pipeline, or a list of names, that this pipeline supercedes. When a change is enqueued in this pipeline, it will be removed from the pipelines listed here. For example, a gate pipeline may supercede a check pipeline so that test resources are not spent running near-duplicate jobs simultaneously.

pipeline.dequeue-on-new-patchset
Default: true

Normally, if a new patchset is uploaded to a change that is in a pipeline, the existing entry in the pipeline will be removed (with jobs canceled and any dependent changes that can no longer merge as well. To suppress this behavior (and allow jobs to continue running), set this to false.

pipeline.ignore-dependencies
Default: false

In any kind of pipeline (dependent or independent), Zuul will attempt to enqueue all dependencies ahead of the current change so that they are tested together (independent pipelines report the results of each change regardless of the results of changes ahead). To ignore dependencies completely in an independent pipeline, set this to true. This option is ignored by dependent pipelines.

pipeline.precedence
Default: normal

Indicates how the build scheduler should prioritize jobs for different pipelines. Each pipeline may have one precedence, jobs for pipelines with a higher precedence will be run before ones with lower. The value should be one of high, normal, or low. Default: normal.

The following options configure reporters. Reporters are complementary to triggers; where a trigger is an event on a connection which causes Zuul to enqueue an item, a reporter is the action performed on a connection when an item is dequeued after its jobs complete. The actual syntax for a reporter is defined by the driver which implements it. See Drivers for more information.

pipeline.success

Describes where Zuul should report to if all the jobs complete successfully. This section is optional; if it is omitted, Zuul will run jobs and do nothing on success – it will not report at all. If the section is present, the listed reporters will be asked to report on the jobs. The reporters are listed by their connection name. The options available depend on the driver for the supplied connection.

pipeline.failure

These reporters describe what Zuul should do if at least one job fails.

pipeline.merge-conflict

These reporters describe what Zuul should do if it is unable to merge the patchset into the current state of the target branch. If no merge-conflict reporters are listed then the failure reporters will be used.

pipeline.config-error

These reporters describe what Zuul should do if it encounters a configuration error while trying to enqueue the item. If no config-error reporters are listed then the failure reporters will be used.

pipeline.enqueue

These reporters describe what Zuul should do when an item is enqueued into the pipeline. This may be used to indicate to a system or user that Zuul is aware of the triggering event even though it has not evaluated whether any jobs will run.

pipeline.start

These reporters describe what Zuul should do when jobs start running for an item in the pipeline. This can be used, for example, to reset a previously reported result.

pipeline.no-jobs

These reporters describe what Zuul should do when an item is dequeued from a pipeline without running any jobs. This may be used to indicate to a system or user that the pipeline is not relevant for a change.

pipeline.disabled

These reporters describe what Zuul should do when a pipeline is disabled. See disable-after-consecutive-failures.

pipeline.dequeue

These reporters describe what Zuul should do if an item is dequeued. The dequeue reporters will only apply if all of the following are true:

  • The pipeline has a start reporter

  • The item has reported start

  • The item was dequeued without a result

The following options can be used to alter Zuul’s behavior to mitigate situations in which jobs are failing frequently (perhaps due to a problem with an external dependency, or unusually high non-deterministic test failures).

pipeline.disable-after-consecutive-failures

If set, a pipeline can enter a disabled state if too many changes in a row fail. When this value is exceeded the pipeline will stop reporting to any of the success, failure or merge-conflict reporters and instead only report to the disabled reporters. (No start reports are made when a pipeline is disabled).

pipeline.window
Default: 20

Dependent pipeline managers only. Zuul can rate limit dependent pipelines in a manner similar to TCP flow control. See Pipeline Window for an overview. Jobs are only started for items in the queue if they are within the active window for the pipeline. The initial length of this window is configurable with this value. The value given should be a positive integer value. A value of 0 disables rate limiting on the dependent pipeline manager.

pipeline.window-floor
Default: 3

Dependent pipeline managers only. This is the minimum value for the window described above. Should be a positive non zero integer value.

pipeline.window-ceiling

Dependent pipeline managers only. This is the maximum value for the window described above. When omitted or set to null, there is no upper limit on the size of the window. If set, must be greater than or equal to the floor.

pipeline.window-increase-type
Default: linear

Dependent pipeline managers only. This value describes how the window should grow when changes are successfully merged by zuul.

linear

Indicates that window-increase-factor should be added to the previous window value.

exponential

Indicates that window-increase-factor should be multiplied against the previous window value and the result will become the window size.

pipeline.window-increase-factor
Default: 1

Dependent pipeline managers only. The value to be added or multiplied against the previous window value to determine the new window after successful change merges.

pipeline.window-decrease-type
Default: exponential

Dependent pipeline managers only. This value describes how the window should shrink when changes are not able to be merged by Zuul.

linear

Indicates that window-decrease-factor should be subtracted from the previous window value.

exponential

Indicates that window-decrease-factor should be divided against the previous window value and the result will become the window size.

pipeline.window-decrease-factor
Default: 2

Dependent pipeline managers only. The value to be subtracted or divided against the previous window value to determine the new window after unsuccessful change merges.